Height adjustable bathtubs that meets all your hygiene and work safety related needs for assisted bathing as institutional bathing.
Assisting patients with bathing is a fundamental aspect of maintaining the patient's hygiene. Bathing not only helps the patient to feel clean and gain a sense of normalcy, but bathing also removes dirt, perspiration, bacteria, and dead skin as well as promotes blood circulation.
Ergonomically designed, and the clean look also makes bathing relaxing and enjoyable.
Product Measurement documents available for download at the bottom of the page.
Product Measurement documents available for download at the bottom of the page.
Maneuver panel for TR900 A
Standard height = 95mm
(2 check valves and 2 ball valves)
(Only TR900 models with cleaning)
The movable foot support may be placed in three positions.
H = 95 mm (Standard equipment)
H = 145 mm (Option)
The product is designed for caregiver's ergonomic use.
Height adjustment for an ergonomic work enviroment for the caregiver.
Lowest position 610 mm from the floor up to the bath rim.
Highest position 940 mm from the floor up to the bath rim.
The clean design makes the bathing hygienic for both caregiver and patient thanks to easy to clean surfaces and pop-up drainage.
Easy to operate and maintain thanks to simple and obvious controls.
Long, key hole shaped bathtub allows more space around the upper body so that the resident can be fully covered with water. It also offers the caregiver easy access to the bathtub from three sides.
Shower and cleaning hoses clearly colour marked and out of reach and sight for resident for saftey.
Cleaning hose (TR 900C):
The double skin fiberglass minimizes heat loss and has a long lifetime.
Suitable to use with the Mobile Patient Lifts or other Patient Lift, mobile or ceiling hoist systems.
Bathing is comfortable and safe thanks to head pillow (Option).
The Whirlpool system generates a gentle massaging effect that stimulates blood circulation that may ease muscle tension.
Option available for all TR 900 models with whirlpool.
Autofill function rapidly fills the bathub and makes the complete bathing cycle more efficient and minimizes the heat loss.
Separate cleaning system with safety on and off valves to ease cleaning of Bath and other equipment.
The optional Stainless Steel burn care bath can be delivered together with all standard TR 900 glass fibre panels both manual and Autofill models.
For more info, press here: TR 900 STAINLESS STEEL
The emergency lowering function is activated at power failure and gives you the possibility to lower the bath by pushing a button inside the bath.
Flow meter control for dilution of cleaning solution. Only for TR 900 models with cleaning.
TMV3 approved thermoscopic mixers for the UK market with separate maximum themperatures for bath fill and shower water.
Product only available at UK retailers.
The tub can be equipped with gantry for shower and cleaning hose to comply with UK regulations regading Category 5 back flow prevention.
The 3/4" (22mm) thermostatic mixing valve, the double filling spouts give a good water flow and short filling time.
For easier handling during installation.
TR Equipment work with distributors world wide, so you don’t have to look far to find someone that can help you access our products.